Home / Machine Manufacturing Technology

Developing a training program in mechanical engineering at the University of Industrial Technology - 1



THAI NGUYEN UNIVERSITY

UNIVERSITY OF EDUCATION

Maybe you are interested!


Developing a training program in mechanical engineering at the University of Industrial Technology - 1

LUONG THANH VAN


DEVELOPING TRAINING PROGRAMS IN MACHINERY MANUFACTURING TECHNOLOGY

AT INDUSTRIAL TECHNOLOGY UNIVERSITY


Major: Educational Management Code: 60.14.01.14


MASTER'S THESIS IN EDUCATIONAL SCIENCE


Scientific supervisor: Associate Professor, Dr. NGUYEN THI THANH HUYEN

COMMITMENT


I hereby certify that the data and research results in the thesis are honest and are the result of my own research.

The documents and data used in the thesis are collected from the unit's reports.

The research results related to the topic have been published ... The citations in

rotation

All documents have clearly stated their source.


Thai Nguyen, October 2017

Thesis author


Luong Thanh Van

ACKNOWLEDGEMENTS


First of all, please allow me to express my deep gratitude to Associate Professor, Dr. Nguyen Thi Thanh Huyen , Thai Nguyen University of Education, for her help and enthusiastic guidance in orienting the topic, guiding me in accessing and exploiting reference materials as well as guiding me during the process of writing and completing my thesis.

I would like to sincerely thank the Board of Directors, the Board of Directors of the Faculty of Psychology - Education, and the Training Department of Thai Nguyen University of Education for creating favorable conditions to help me research and complete this thesis.

I would like to express my sincere gratitude to the teachers and colleagues of the University of Industrial Technology for their enthusiastic help and providing valuable information and materials during my studies and thesis writing.

Finally, I would like to express my gratitude to my friends and family who have supported and created all conditions to help me study and complete this thesis.


Author


Luong Thanh Van

INDEX

COMMITMENT i

ACKNOWLEDGEMENTS ii

TABLE OF CONTENTS iii

LIST OF SYMBOLS AND ABBREVIATIONS iv

LIST OF TABLES v

LIST OF DIAGRAM

INTRODUCTION 1

1. Reasons for choosing topic 1

2. Research purpose 2

3. Research object and subject 2

4. Scientific hypothesis 3

5. Research task 3

6. Limitation of research scope 3

7. Research method 3

8. Thesis structure 4

Chapter 1. THEORETICAL BASIS FOR DEVELOPING UNIVERSITY TRAINING PROGRAMS IN MACHINERY MANUFACTURING TECHNOLOGY 5

1.1. Overview of research problem 5

1.1.1. Overseas studies on developing university training programs 5

1.1.2. Domestic studies on developing university training programs 6

1.2. Concepts of tools of topic 8

1.2.1. Program, university training program 8

1.2.2. Development, training program development 11

1.2.3. Mechanical Manufacturing Technology Industry, Mechanical Manufacturing Technology Industry Training Program

create machine 13

1.2.4. Developing training programs for the mechanical engineering industry 14

1.3. Some models of university training program development 15

1.4. Basic issues in developing undergraduate training programs in Mechanical Engineering Technology according to the CDIO approach 20

1.4.1. Objectives of developing the University training program in Manufacturing Technology

CDIO 20 approach machine building

1.4.2. Principles of developing university training programs in Technology

Machine manufacturing by CDIO 20 approach

1.4.3. Content of developing undergraduate training program in Mechanical Engineering Technology according to CDIO approach 21

1.4.4. Process of developing undergraduate training program in Manufacturing Technology

CDIO 22 approach machine building

1.5. Factors affecting the development of undergraduate training programs in Mechanical Engineering according to the CDIO approach 29

1.5.1. Subjective factors 29

1.5.2. Objective factors 30

Chapter 1 Conclusion 32

Chapter 2. CURRENT STATUS OF DEVELOPMENT OF UNIVERSITY TRAINING PROGRAM IN MACHINERY MANUFACTURING TECHNOLOGY AT THAI NGUYEN UNIVERSITY OF TECHNOLOGY 33

2.1. Overview of Thai Nguyen University of Industry and Mechanical Engineering 33

2.2. Overview of the survey on the current status of training program development in Mechanical Engineering at Thai Nguyen University of Industry 35

2.2.1. Purpose of the survey 35

2.2.2. Survey content 35

2.2.3. Survey subjects 35

2.2.4. Survey method 35

2.2.5. How to process survey results 35

2.3. Current status of training program development in Mechanical Engineering

at Thai Nguyen University of Technology following CDIO approach 36

2.3.1. Perceptions of managers and lecturers on training program development

Creating a Mechanical Engineering major based on the CDIO approach 36

2.4. Current status of training program development content in Manufacturing Technology industry

machine building at Thai Nguyen University of Industry 41

2.5. Current status of the forces participating in building the training program for the Mechanical Manufacturing Technology industry according to the CDIO approach 44

2.6. Current status of the training program development process of Mechanical Manufacturing Technology according to CDIO approach at Thai Nguyen University of Industry ...46

2.6.1. Current status of implementation of steps in the training program development process

Creating a Mechanical Engineering major based on the CDIO approach 46

2.6.2. Current status of implementing the training program development process for the Mechanical Manufacturing Technology industry according to the CDIO approach 50

2.7. Current status of facilities and equipment serving the development of training programs in Mechanical Manufacturing Technology according to the CDIO approach 64

2.8. Factors affecting the development of the training program in Mechanical Engineering at Thai Nguyen University of Industry 66

2.9. General assessment of the current status of training program development in Mechanical Engineering at Thai Nguyen University of Industry 68

2.9.1. Strengths 68

2.9.2. Limitation 69

Chapter 2 Conclusion 71

Chapter 3. MEASURES TO DEVELOP THE UNIVERSITY TRAINING PROGRAM IN MACHINERY MANUFACTURING TECHNOLOGY AT THAI NGUYEN UNIVERSITY OF TECHNOLOGY 72

3.1. Principles for proposing solutions 72

3.1.1. Principle of ensuring objectiveness 72

3.1.2. Principle of ensuring systematicity 72

3.1.3. Principle of ensuring inheritance 72

3.1.4. Principles of ensuring legality 72

3.1.5. Principles of ensuring effectiveness 72

3.2. Measures to develop the training program of Mechanical Manufacturing Technology according to the CDIO approach at Thai Nguyen University of Industry 73

3.2.1. Measure 1. Raise awareness among managers and lecturers of the Faculty of Mechanical Engineering about the importance of developing training programs for the industry.

Machine manufacturing technology according to CDIO approach. 73

3.2.2. Measure 2. Organize training to improve the capacity to develop training programs in the field of Mechanical Manufacturing Technology according to the CDIO approach for the staff.

Management, lecturer of Mechanical Engineering Department 75

3.2.3. Measure 3. Strengthen coordination between the School and businesses and labor-using establishments in developing industry training programs.

Machine manufacturing technology 78

3.2.4. Measure 4. Innovation in assessment and evaluation activities in implementing the development of the Mechanical Engineering Technology Training Program 80

3.2.5. Measure 5. Increase investment and manage facilities well to serve the development of training programs in the field of Mechanical Engineering Technology in a practical approach.

near CDIO 82

3.3. Relationship between measures 84

3.4. Testing the urgency and feasibility of measures 85

3.4.1. Purpose of the test 85

3.4.2. Test subjects 85

3.4.3. Test content 85

3.4.4. Testing method 85

3.4.5. Test results 85

Chapter 3 Conclusion 90

CONCLUSION AND RECOMMENDATIONS 91

1. Conclusion 91

2. Recommendation 92

REFERENCES 95

APPENDIX

LIST OF SYMBOLS AND ABBREVIATIONS


CDIO : Conceiving-Designing-Implementing-Operating CNCTM : Machine manufacturing technology

Industrialization - Modernization: Industrialization - Modernization University of Technology: University of Industrial Technology Thai Nguyen University: Thai Nguyen University

GD & DT: Education and training GDĐH: Higher education

Comment


Agree Privacy Policy *